{"product_id":"lewitt-lct-940-fet-and-tube-large-diaphragm-condenser-microphone","title":"Lewitt LCT 940 FET and Tube Large-Diaphragm Condenser Microphone","description":"\u003cp\u003eYour studio FET and tube mic in the same housing. The Lewitt LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone. With \"Tube\" you get warmth and musical harmonics, while \"FET\" gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns. The LCT 940 combines a premium large-diaphragm FET condenser microphone and a top-notch tube microphone in a single housing.\u003c\/p\u003e\n\u003cp\u003eSet polar pattern, pre-attenuation, and low-cut. There is a user interface on the remote control for a quick and accurate setup of pattern, pre-attenuation, and low-cut. Easily check or change the settings, even in complete darkness due to its illuminated user interface. The power supply unit is integrated.\u003c\/p\u003e\n\u003cp\u003eWhat's the AMPLIFICATION knob? By using the AMPLIFICATION knob, you can mix the two distinct microphone circuits, FET and tube circuit at any ratio to find your sweet spot. This way you can dial in the ideal combination of warmth, punch, and clarity. Works brilliantly to adapt the LCT 940 to different voices.\u003c\/p\u003e\n\u003cp\u003eA polar pattern affects how much room sound you end up recording. But switching your polar pattern not only changes the directivity, it also alters the frequency response, resulting in a different sound. You can also control the proximity effect, and have it pronounced or reduced according to your application.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube and FET microphone in one housing\u003c\/li\u003e\n\u003cli\u003eBlend tube and FET circuit at any ratio\u003c\/li\u003e\n\u003cli\u003eStudio centrepiece\u003c\/li\u003e\n\u003cli\u003e12AX7 tube\u003c\/li\u003e\n\u003cli\u003eRemote control and power supply in one\u003c\/li\u003e\n\u003cli\u003eMulti-pattern design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat’s Included?:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone\u003c\/li\u003e\n\u003cli\u003eShock Mount\u003c\/li\u003e\n\u003cli\u003eLCT 40 Wxx\u003c\/li\u003e\n\u003cli\u003e11-Pin Audio Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Condenser, externally polarized\u003c\/li\u003e\n\u003cli\u003eAcoustical operating principle: Pressure gradient transducer\u003c\/li\u003e\n\u003cli\u003eTransducer Ø: 25.4 mm, 1 in\u003c\/li\u003e\n\u003cli\u003ePolar pattern: Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns\u003c\/li\u003e\n\u003cli\u003eFrequency range: 20 ... 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 23 mV\/Pa, -33 dBV\/Pa (cardioid)  \/  20 mV\/Pa, -34 dBV\/Pa (omni)  \/  23 mV\/Pa, -33 dBV\/Pa (figure-8)\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level (FET): 8 dB (A), cardioid  \/  9 dB (A), omni  \/  8 dB (A), figure-8\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level (Tube): 12 dB (A), cardioid  \/  13 dB (A), omni  \/  12 dB (A), figure-8\u003c\/li\u003e\n\u003cli\u003eMax. SPL for 0.5 % THD (FET): 143 dBSPL, 0 dB pre-attenuation\u003c\/li\u003e\n\u003cli\u003eMax. SPL for 0.5% THD (Tube): 140 dBSPL, 0 dB pre-attenuation\u003c\/li\u003e\n\u003cli\u003eSignal \/ noise ratio (FET): 86 dB (A)\u003c\/li\u003e\n\u003cli\u003eSignal \/ noise ratio (Tube): 82 dB (A)\u003c\/li\u003e\n\u003cli\u003eDynamic range of FET mic. Amp.: 135 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range of Tube mic. Amp.: 128 dB\u003c\/li\u003e\n\u003cli\u003ePre-attenuation pad: 0 dB  \/  -6 dB  \/  -12 dB  \/  -18 dB\u003c\/li\u003e\n\u003cli\u003eLow-cut filter: linear  \/  40 Hz (12 dB\/oct)  \/  150 Hz (6 dB\/oct)  \/  300 Hz (6 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eInternal impedance: 200 Ω\u003c\/li\u003e\n\u003cli\u003eRated load impedance: 1,000 Ω\u003c\/li\u003e\n\u003cli\u003ePSU - supply voltage: 230 V, 50 Hz  \/  110 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: 170 mA\u003c\/li\u003e\n\u003cli\u003eConnector: Gold plated 11-pin XLR\u003c\/li\u003e\n\u003cli\u003eMicrophone dimensions: 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in\u003c\/li\u003e\n\u003cli\u003ePSU dimensions: 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in\u003c\/li\u003e\n\u003cli\u003eMicrophone net weight: 662 g, 23.3 oz\u003c\/li\u003e\n\u003cli\u003ePSU net weight: 1,930 g, 68.1 oz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lewitt","offers":[{"title":"Default Title","offer_id":33302187966541,"sku":"LCT940","price":2549.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0085\/8118\/5613\/products\/479c07bb9c0aaeb12406ec5cb1b7e316.jpg?v=1684871149","url":"https:\/\/musiccitycanada.com\/products\/lewitt-lct-940-fet-and-tube-large-diaphragm-condenser-microphone","provider":"Music City Canada","version":"1.0","type":"link"}