Audix M63 Hypercardioid Boundary Microphone w/ Logic Remote - Rear Cable

SKU: M63-ADX | UPC: 687471291351

Regular price Your Price: $699.00 Save $0.00


This product is available from the supplier Audix warehouse.
It usually arrives to our location within 7-14 days.




Music City Canada is an Authorized Dealer for Audix Products.


Overview of Audix M63 Hypercardioid Boundary Microphone w/ Logic Remote - Rear Cable

The M63 is a condenser boundary microphone featuring programmable functionality including a local toggle on/off, momentary talk and mute switching, and LED status (red/green) indicators. Optimized for speech, the M63 employs the Micros™ series technology for superior audio quality and performance. The M63 is also the industry’s only programmable boundary microphone with a patented internal shock-mount suspension system to reduce noise caused by touch and surface vibrations.

The M63 uses an internal microprocessor programmed to provide common DSP functions at a fraction of the cost of a typical DSP solution. Only the microphone connection (A+, A- and ground) is required for full functionality when set to internal logic. Phantom power is required (No other power supply is needed). For installations not requiring elaborate DSP programming, the M63 provides an easy-to-operate solution without the cost and labor required for DSP operation.

Features:

  • Sleek, modern design
  • Programmable (red/green) LEDs for active/ mute status
  • Industry-first internal shockmount
  • Programmable toggle on, toggle off, momentary talk and momentary mute button modes
  • Ergonomic flush-mount button
  • Optimized for speech clarity
  • High sensitivity and signal-to-noise
  • Immunity from RF interference
  • Slide-resistant rubber base

Specifications:

Transducer Type: Condenser

Frequency Response: 50 Hz – 15 kHz

Polar Pattern: Cardioid or Omni

Output Impedance: 150 ohms

Sensitivity: 52 mV / Pa @ 1k

Equivalent Noise Level: 72 dB

Signal to Noise Ratio: 22 dB

Maximum SPL: ≥124 dB

Dynamic Range: 102 dB

Power Requirements: 48V phantom

Connector: Two 3-pin terminal block connectors

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Materials / Finish: Zinc alloy / black

Weight: 350 g / 12.3 oz

Dimensions (W x L): 81 mm x 103 mm / 3.25 in 4 in

Music City Canada is an authorized reseller for Audix products. Purchases are backed with full manufacturer warranty in Canada. All orders ship from our Canadian warehouse.