Neumann KH 310 A L G Active Near-field Monitor - Left

A two-way, active near-field monitor, this has been designed to suit smaller studio environments such as project studios, OB vans, post production as well as mixing and mastering studios. With a small footprint of 154 x 194mm (WxD), these studio monitors can also be used as rear loudspeakers in multi-channel systems. The class-D 120W (LF) and 70W (HF) amplifiers combine with the four-inch LF driver and one-inch tweeter, to give a wide frequency response of 53Hz - 22kHz at -6dB and 57Hz - 21kHz at -3dB and a maximum SPL of 108.8dB at 1m. Both drivers have black, integrated, metal grilles for protection, and the two front facing, bass-reflex ports help to position the speakers in small spaces. The front facing panel also features an illuminated Neumann logo, which among other identifying signals, shows white under power on, rose for identification mode and red when limiting or sensing error or clipping. All connectivity and user-controls can be found on the rear of the loudspeaker, including electronically balanced XLR/Jack combination input and RJ45 connection for IP network compatibility using CAT5 or better cable. At the rear top of the loudspeaker, four controls can be used to adjust the input gain (rotary control), the output level (4-way switch), local/network control, and 'Low Mid' 'acoustic control' which allows the user to set the location of the monitor; 'free-standing', on a 'small desk', 'medium desk', or 'large desk'. Switching the latter of these switches enables the user to reduce the low-mid frequencies by 1.5dB, 3dB, or 4.5dB or leave at 0db flat response. AC power input is by way of 'figure-8 socket, to take an IEC C7 connector, and power on/off by way of latching rocker switch. Auto standby is 90 minutes by default, however this can be adjusted or disabled using connected compatible software. Available in white (KH 80 DSP A W) or metallic anthracite (KH 80 DSP A G).