Audio-Technica AT899c Subminiature Omnidirectional Condenser Lavalier Microphone w/ cH Connector - Black

The AT899 subminiature omnidirectional microphone is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. Includes a clothing clip, viper clip, magnet clip and lanyard, two windscreens, two element covers, three single mic holders, and two double mic holders.

AT899cH: 55" (1.4 m) permanently attached cable terminated with a screw-down 4-pin connector for use with Audio-Technica cH-style body-pack wireless transmitters; no power module.

Specifications:

Element: Fixed-charge back plate, permanently polarized condenser

Polar Pattern: Omnidirectional

Frequency Response: 20-20,000 Hz

Low Frequency Roll Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa

Output Impedance:

• Phantom: 200 ohms
• Battery: 250 ohms (wired only)

Maximum Input Sound Level:

• Phantom: 138 dB SPL, 1 kHz at 1% T.H.D.
• Battery: 116 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range:

• Phantom: 108 dB, 1 kHz at Max SPL
• Battery: 86 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa

Phantom Power Requirements: 11-52V DC, 2 mA typical

Battery Type: 1.5V AA/UM3

Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)

Switches: Flat, roll-off (recessed)

Weight:

• Microphone: 0.02 oz (0.5 g)
• Power Module: 3.6 oz (102 g)

Dimensions:

• Microphone 16.0 mm long, 5.0 mm diameter -
• Power Module 145.0 mm long, 21.0 mm diameter

Output Connector (Power Module): Integral 3-pin XLRM-type

Accessories Included:

• AT8537 power module
• AT8439 cable clip
• clothing clip base
• viper clip base
• magnet clip base and plate with lanyard
• three single mic holders
• two double mic holders
• two element covers
• two windscreens
• battery
• protective carrying case

Audio-Technica Case Style: M29