Audio-Technica Consumer AT-LPW40WN Stereo Turntable - Walnut

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

Features:

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

Motor features a speed-sensor system to maintain accurate platter rotation speed

Fully manual operation

Adjustable dynamic anti-skate control

Professional anti-resonance, die-cast aluminum platter with rubber mat

AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest

Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer

Built-in switchable phono pre-amplifier for phono or line-level output

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications:

Type: Belt-drive manual turntable

Motor: DC servo with Active Speed Stabilization

Drive Method: Belt drive

Speeds: 33-1/3 RPM, 45 RPM

Turntable Platter: Die-cast aluminum

Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio: >60dB

Output Level:

• Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized

Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.

Dimensions: 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H

Weight: 4.72 kg (10.40 lbs.) without dust cover

Accessories Included:

• Dust cover
• Platter
• Turntable mat
• Drive belt
• Counterweight
• AT-HS4 headshell
• AT-VM95E stereo cartridge
• 45-RPM adapter
• RCA audio cable (approx. 1.0 m (3.3'))
• AC adapter (approx. 1.5 m (4.9')) (AD-SA1205WE)
• Dust cover hinges
• Tonearm type: Static balanced straight carbon tonearm 
• Effective arm length: 223.6 mm 
• Overhang: 18.6 mm 
• Tracking error angle: <2 degrees
• Applicable cartridge weight: 12-17 g 
• Stylus pressure adjustment range: 0-3 g 
• AC Adapter: 12 V, 0.5 A 
• Replacement Stylus: AT-VMN95E