Audio-Technica Consumer AT-LPW50PB Fully Manual Two-Speed Stereo Turntable

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

Specifications:

Type: Belt-drive manual turntable

Motor: DC servo with Active Speed Stabilization

Drive Method: Belt drive

Speeds: 33-1/3 RPM, 45 RPM

Turntable Platter: Die-cast aluminum

Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio: >60dB

Output Level:

• Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized

Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A

Max. Dimensions:

• With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H
• Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H

Weight: 5.56 kg (12.26 lbs.) without dust cover

Accessories Included:

• Dust cover
• Platter
• Turntable mat
• Drive belt
• Counterweight
• AT-HS4 headshell
• AT-VM95E stereo cartridge (black)
• 45-RPM adapter
• RCA audio cable (approx. 1.0 m (3.3'))
• AC adapter (approx. 1.5 m (4.9'))
• Dust cover hinges

Tonearm type: Static balanced straight carbon tonearm

Effective arm length: 223.6 mm

Overhang: 18.6 mm

Tracking error angle: <2 degrees

Applicable cartridge weight: 12-17 g

Stylus pressure adjustment range: 0-3 g

Replacement Stylus: AT-VMN95E BK