BZBGEAR - 8X8 Digital Audio Processor with RS-232, TCP/IP and PC program control

Convert and route analog and digital audio onto your Dante network with this 8x8 Digital Audio Processor with RS-232, TCP/IP & PC Program Control from BZBGear. This digital audio signal processor allows you to input analog balanced/stereo mic or line audio via 3-pin terminal block inputs, or you can input digital audio via HDMI and output audio onto a Dante network using the dedicated Dante RJ45 port.

The processor can also output digital audio via HDMI and analog audio via multiple 3-pin terminal blocks or a 3.5mm stereo jack. The unit can be controlled via serial or by control software on a Windows 7/10 computer, and it features multiple signal processing modules, including an auto mixer, expander, equalizer, compressor, auto gain control, limiter, high pass filter, low pass filter, and delay. It also supports monitoring, adaptive noise reduction, and 48V phantom power on the mic inputs.

Key FeaturesHDMI 2.0b compliantProvides four balanced mic inputs, six balanced linear inputs, and ten balanced linear outputsSupport HDMI audio signal input, loop out, audio embedding, and de-embeddingStandard Dante network audio interfaceAdaptive feedback suppression functionFull-band adaptive acoustic echo cancellation technologyDynamic adaptive noise reduction technology is provided to reduce noise with signal level up to 18 dBAuto mixer function is provided to set the order of priority when multiple microphones are input at one timeDigital signal processing modules include Expander, Equalizer, Compressor, Auto Gain Control, Limiter, High Pass Filter, Low Pass Filter, and DelayVolume control, meter, scene control, and moreCapable to switch matrix routings 48V phantom power supply for four mic inputs.