Electro-Voice MB300W - Array Kit (2-Plates)

Horizontal array kit for side-by-side arraying of two Sb121 Sb121a Sb122PI Sx100+ or Sx300 (use a second Mb300 to array three systems; the Mb300 requires one Mb200 U-bracket kit per speaker system) black. The Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. The Mb300 is used in conjunction with the Mb200 installation bracket to create a speaker array. The array can be constructed in either of two angular configurations: Speakers side by side (50 angle) for a tight array Speakers spread slightly (60 angle) for wider coverage (Note that a full 360 array can only be accomplished with the 60 angle pattern.) Suspension of the speaker array is made easy with the four 12.7-mm (0.5-in.) holes located on the Mb300. A cable, chain quick link, or other suitable hardware which is rated for overhead lifting (not supplied with this kit) can be used to connect to the array for flying.