JBL 306P MKIII 6" Powered Studio Monitor (Each)

The JBL LSR306P MkIII gives you the extra low-end reach and output you need when a compact studio monitor needs to fill a larger room. Its redesigned 6.5-inch low-frequency driver and high-performance silk dome tweeter cover 43 Hz to 38 kHz, while the 110-watt bi-amplified Class D system delivers up to 112 dB peak SPL with low self-noise and plenty of headroom. JBL's Image Control Waveguide and Slipstream™ port help produce accurate stereo imaging, controlled bass, and consistent response across a wide 120° x 90° coverage area.

A poor room can make a great monitor sound bad, so the LSR306P MkIII gives you 81 DSP-based room tuning combinations. Four onboard controls let you compensate for desktop, stand, or wall placement while adjusting boundary compensation and high- and low-frequency response, because it's considerably cheaper to tune your speakers to the room than it is to rebuild it. That makes the LSR306P MkIII a strong fit for home studios, professional control rooms, post-production suites, and immersive audio setups where the truth is the only thing you want to hear.

Features

• New silk dome tweeter delivers accurate high mid detail and smooth response extending to 38 kHz.
• JBL’s patented waveguide delivers precise imaging and consistent 120° × 90° coverage.
• Redesigned 6.5-inch woofer delivers higher output, lower distortion, and controlled bass down to 43 Hz.
• Double-flared Slipstream™ port reduces turbulence and port noise for clean, articulate bass at all levels.
• 81 customized presets to compensate for any acoustic environment.
• Bi-amplified 110-watt Class D amplification delivers wide dynamic range, ultra-low noise, and up to 112 dB peak SPL.

Specifications

• LF DRIVER SIZE: 165mm (6.5”)
• HF DRIVER SIZE: 25mm (1”)
• HF DRIVER TYPE: Soft dome
• CROSSOVER: 2040Hz
• OK FOR USE NEAR MAGNETICALLY SENSITIVE EQUIPMENT: Yes
• INPUT SENSITIVITY (-10dBV INPUT): 92dB / 1m
• POWER CONFIGURATION: Bi-amplified
• HF DRIVER POWER AMP: 55W, Class-D
• LF DRIVER POWER AMP: 55W, Class-D
• FREQUENCY RESPONSE (±3dB): 52Hz - 27kHz
• FREQUENCY RANGE (-10DB): 43Hz - 38kHz
• LOW FREQUENCY EXTENSION (-10dB): 43Hz
• MAXIMUM RMS SPL: 100dB
• MAXIMUM PEAK SPL: 112dB
• MAXIMUM PEAK INPUT LEVEL: (-10dBV / +4dBu): +7dBV / +21dBu
• SYSTEM DISTORTION CRITERIA: <10% THD at maximum output with full: compressor / limiter engagement
• ELECTRICAL DISTORTION CRITERIA:
  • <0.1% THD @ 1W output,
  • <1% THD @ full rated output
• SAMPLE RATE 192kHz
• INPUT IMPEDANCE 20kΩ
• SIGNAL TO NOISE RATIO: 83dB, A-Weighted, relative to 1W output
• COVERAGE HORIZONTAL x VERTICAL: 120° x 90°
• ANALOG INPUT TYPES: 1 x Neutrik Combo, balanced
• HF ADJUST @ 3kHz high shelf: -2dB, 0dB, +2dB
• LF ADJUST @ 300Hz low shelf: -2dB, 0dB, +2dB
• AC INPUT VOLTAGE: 100-240VAC (+/- 10%), 50/60Hz
• ENCLOSURE TYPE: Ported
• ENCLOSURE CONSTRUCTION: 15mm MDF
• ENCLOSURE FINISH: Matte black PVC
• BAFFLE CONSTRUCTION: Injection-molded structural ABS, UL 94 V-0
• REAR PANEL CONSTRUCTION: 2mm SPCC
• MOUINTING POINTS:
  • M4 x 8 (4 on top, 4 on bottom),
  • 75 x 75 mm VESA pattern
• CABINET DIMENSIONS:
  • (H x W x D):**
    • 370 x 210 x 290 mm
    • (14.6 x 8.3 x 11.4 inch)
• NET WEIGHT: 6.7 kg (14.8 lbs)
• SHIPPING GROSS WEIGHT: 9.4 kg (20.6 lbs)