JBL 308P MKIII 8" Powered Studio Monitor (Each)

The JBL LSR308P MkIII offers the low-end reach, output, and detail larger spaces need for serious monitoring. Its redesigned 8-inch low-frequency driver and high-performance silk dome tweeter offer an exceptionally wide 41Hz-38kHz frequency range, powered by a 110-watt bi-amplified Class D system that produces up to 113 dB peak SPL with low self-noise and strong transient response. JBL's Image Control Waveguide and Slipstream™ port help maintain controlled bass, clear high frequencies, and accurate stereo imaging across a wide 120° x 90° sweet spot.

With more output comes more opportunity for an unruly room to make its own suggestions, so the LSR308P MkIII gives you 81 DSP room-tuning combinations through four onboard controls to tame its wild ways. You can compensate for desktop, stand, or wall placement while adjusting boundary response and high- and low-frequency balance. The result is a monitor suited to project studios, professional control rooms, educational facilities, and immersive production environments where you need to hear the details without second-guessing the speaker.

Features

• New HF driver delivers faster transients and accurate ambience, texture, and spatial detail extending to 40 kHz.
• JBL’s patented waveguide delivers precise imaging and consistent 120° × 90° coverage.
• Redesigned woofer delivers higher output, lower distortion, and controlled bass down to 41 Hz.
• Double-flared Slipstream™ port reduces turbulence for clean, accurate bass at all levels.
• 81 customized presets to compensate for any acoustic environment.
• Bi-amplified 86-watt Class D amplification delivers exceptional dynamics, ultra-low noise, and up to 113 dB peak SPL.

Specifications

• LF DRIVER SIZE: 203mm (8”)
• HF DRIVER SIZE: 25mm (1”)
• HF DRIVER TYPE: Soft dome
• CROSSOVER: 1960Hz
• OK FOR USE NEAR MAGNETICALLY SENSITIVE EQUIPMENT: Yes
• INPUT SENSITIVITY (-10dBV INPUT): 92dB / 1m
• POWER CONFIGURATION: Bi-amplified
• HF DRIVER POWER AMP: 55W, Class-D
• LF DRIVER POWER AMP: 55W, Class-D
• FREQUENCY RESPONSE (±3dB): 49Hz - 27kHz
• FREQUENCY RANGE (-10DB): 41Hz - 40kHz
• LOW FREQUENCY EXTENSION (-10dB): 41Hz
• MAXIMUM RMS SPL: 101dB
• MAXIMUM PEAK SPL: 113dB
• MAXIMUM PEAK INPUT LEVEL (-10dBV / +4dBu): +7dBV / +21dBu
• SYSTEM DISTORTION CRITERIA: <10% THD at maximum output with full compressor / limiter engagement
• ELECTRICAL DISTORTION CRITERIA:
  • <0.1% THD @ 1W output,
  • <1% THD @ full rated output
• SAMPLE RATE 192kHz
• INPUT IMPEDANCE 20kΩ
• SIGNAL TO NOISE RATIO: 83dB, A-Weighted, relative to 1W output
• COVERAGE HORIZONTAL x VERTICAL: 120° x 90°
• ANALOG INPUT TYPES: 1 x Neutrik Combo, balanced
• HF ADJUST @ 3kHz high shelf: -2dB, 0dB, +2dB
• LF ADJUST @ 300Hz low shelf: -2dB, 0dB, +2dB
• AC INPUT VOLTAGE: 100-240VAC (+/- 10%), 50/60Hz
• ENCLOSURE TYPE: Ported
• ENCLOSURE CONSTRUCTION: 15mm MDF
• ENCLOSURE FINISH: Matte black PVC
• BAFFLE CONSTRUCTION: Injection-molded structural ABS, UL 94 V-0
• REAR PANEL CONSTRUCTION: 2mm SPCC
• MOUINTING POINTS:
• M4 x 8 (4 on top, 4 on bottom),
• 75 x 75 mm VESA pattern
• CABINET DIMENSIONS:
  • (H x W x D):**
    • 444 x 249 x 296 mm
    • (17.5 x 9.8 x 11.7 inch)
• NET WEIGHT: 8.8 kg (19.4 lbs)
• SHIPPING GROSS WEIGHT: 12.0 kg (26.3 lbs)