Traynor - DynaBass 300T - Tilt Back 350 Watt Bass GTR Combo - USED

Pre-owned Traynor Dynabass Series Low profile 330T - 2x8" full range- tilt back bass guitar combo amp. Model YS-1071 and a solid 350 watts of thundering bass amp power. Fully tested and in perfect working order.

So,...The fine folks at Traynor, located here in the great white north have done it once again. Not only have they found a way to get major bottom end projection out of twin eight-inch Celestion bass drivers, they've packaged them in a 350-Watt combo that tilts back to act as a near-field monitor and stands just sixteen inches high (not even up to your knee). 
Loaded with various pro-essential features like Active and Passive instrument inputs, an XLR Line output, a selectable input Limiter, a versatile four-band EQ, a Scoop tone control and Master volume, the DynaBass 300T is perfect for virtually any live or studio gig.

To add a healthy dose of versatility, the Traynor DynaBass 300T provides a line-level Monitor In jack with its own Gain pot for mixing-down CD, MP3 or stage/studio monitor tracks with your bass lines through the Headphone jack. You also get a Tuner output and a Mute button for silent, precise tuning tweaks. And there's another versatile feature - the whole amp chassis can be removed and used as a lightweight 350-Watt head. And,...if you prefer a mini-stack, add the optional TC112, or any other extension cabinet of proper ohm-age and let this bad boy really open up!!.  In true Traynor fashion, ruggedness is another essential. The DynaBass 300T's eleven-ply birch cabinet construction ensures unmatched durability even under the most extreme working conditions while its metal grille protects the speaker components and a rigid all-metal box chassis protects the electronics.

The Traynor YS1071 Boast's The Following Features,...

- Twin 8-inch Celestion Drivers & Switch-Select Tweeter
- 4 band EQ
- Scoop Tone Control
- Active and Passive Instrument Level Inputs
- Solid Plywood Cabinet Construction
- All Metal Grille to Protect Speaker Components
- All Metal Box Chassis
- Integrated All-Metal Bar Handles
- XLR Balanced Line Output Selectable Pre or Post EQ
- 1/4-inch Headphone Output

Specifications:
- Type - Bass Combo
- Power @ min. impedance (Watts) - 350 @ 4 Ohms
- Burst Power 2 cycle (Watts) - 700
- Frequency Response (Hz +/-3dB) - 20 - 20k
- Speakers;.. 2 x 8-inch, 150Wpgm, 16-Ohm Celestions
- Tweeter:..30Wpgm, 8-Ohm Piezo with Defeat Switch
- Front Panel Connectors - Active (-9dB) & Passive (-0dB) 1/4-inch Inputs, 1/4" Tuner & stereo Phones Outputs
-Front Panel Controls - Gain, +/-15dB Bass, Low Mid, High Mid, & Treble EQ, 0dB to -15dB 400Hz Scoop & Master volume
-Front Panel Additional Features - preamp Clip LED, Mute button and LED, Pre/Post-EQ Line Out select button, Limiter on/off button, Power     switch & LED
 Rear Panel Features - Tweeter Active/Defeat switch, line-level 1/4" Monitor In jack & Monitor Gain control,
balanced 1/4" Efx Send & Return jacks, balanced XLR Line Out with Ground Lift button, Speakon + 1/4" Speaker outputs - Speakon4 + 2x1/4"
Input Sensitivity (mV) - 80
Line Out Sensitivity (Vrms) - 1
Protection - Thermal, Overcurrent
Dimensions (DWH, inches) - 15 x 20.5 x 16
Dimensions (DWH, cm) - 38 x 52 x 41
Weight (lbs / kg) - 45 / 20.4

- Made in Toronto, Canada.

- Serial Number 0035524T